News and Information

2025-08-04

The hard power behind 34 patents! How does Mountainpeak Technology lead the industrial silicon intelligent control system?

Under the dual drive of Industry 4.0 and the "dual carbon" goals, the industrial silicon industry is undergoing an unprecedented green and intelligent transformation. In this transformation, Chengdu Mountainpeak Technology Co., Ltd. (hereinafter referred to as "Chengdu Mountainpeak Technology") has become a leader in the field of industrial silicon intelligent control systems, leveraging its strong patent accumulation and technological innovation capabilities. 1. Patent Foundation: A Solid Backing for Technological Innovation 1.1 Construction and Accumulation of Patent Matrix Since its establishment in 2007, Chengdu Mountainpeak Technology has always regarded technological innovation as the core of its development, having obtained 34 national patent authorizations, with utility model patents accounting for over 80%, covering key areas such as submerged arc furnace control, waste heat recovery, and intelligent casting. These patents form a three-dimensional technology system of "hardware + software + system integration": - A waste heat recovery device for submerged arc furnaces (Patent No.: ZL 2021 2 2110741.3): Recovers furnace waste heat through heat exchange technology for preheating raw materials or power generation, improving overall energy efficiency; - Screening equipment for metallurgical materials (Patent No.: ZL 2021 2 2110734.3): Uses high-frequency vibration and intelligent classification technology to increase raw material purity to over 99.5%; - Automatic feeding equipment for batching systems (Patent No.: ZL 2021 2 2122914.3): Achieves automatic material conveying, weighing, and mixing with an error rate controlled within ±0.3%. 1.2 Breakthroughs and Applications of Core Technologies Chengdu Mountainpeak Technology's patented technologies are not only numerous but also represent significant quality breakthroughs. For example, the submerged arc furnace intelligent control system uses AI algorithms to optimize batching ratios, combined with real-time data monitoring and dynamic adjustment technology, achieving precise and intelligent control of the production process. Its successful application in Xinjiang Hesheng Group's 800,000-ton annual industrial silicon production line has significantly improved production efficiency, promoted the upgrade to a "dark factory," saved over 30,000 tons of standard coal annually, and set a benchmark for green production in the industry. Similarly, the development of high and low voltage intelligent voltage regulation systems demonstrates Chengdu Mountainpeak Technology's technical strength. Addressing voltage fluctuations and power factor issues in industrial electricity use, this system integrates dynamic reactive power compensation technology and frequency conversion control modules, significantly improving equipment power factor and reducing line losses, bringing notable energy-saving effects to high-energy-consuming equipment in industries such as building materials and chemicals. 2. Industry Applications: From Single Equipment to Full-Chain Solutions 2.1 Demonstration Effect of Benchmark Projects Chengdu Mountainpeak Technology's patented technologies have not only performed excellently in experiments but have also been practically applied and verified in multiple benchmark projects. For example, in the 100,000-ton hydropower silicon energy-saving and environmental protection project of Yunnan Yongchang Silicon Industry, Chengdu Mountainpeak Technology achieved efficient resource utilization and low-carbon production through the collaborative application of a fully automatic batching system, intelligent control system, and industrial IoT platform. This project not only improved production efficiency and product quality but also significantly reduced energy consumption and emissions, injecting new momentum into the development of Yunnan's "hydropower silicon material—photovoltaic module" trillion-level green industrial chain. (Construction site of the Yongchang project) Additionally, Chengdu Mountainpeak Technology deployed a fully automatic batching system for Xinjiang Qiya's "coal-electricity-silicon integration" project, successfully replacing traditional manual operations and reducing raw material batching error rates from ±5% to ±0.3%. This precision breakthrough laid a critical foundation for the stable and efficient annual production of 800,000 tons of industrial silicon, demonstrating Mountainpeak Technology's profound strength in industrial silicon production. 2.2 Provision of Full-Chain Solutions Chengdu Mountainpeak Technology has built a "equipment + data + management" integrated service system: - Photovoltaic field: Provided DCS control modules and intelligent logistics systems for Tongwei Solar's Jintang base, achieving full-process energy consumption monitoring of battery cell production; - Metallurgical field: Collaborated with Xinjiang Hesheng Group to develop an automatic casting system, improving product yield through precise measurement and unmanned operation; - Building materials field: Transferred metallurgical waste heat recovery technology to the cement industry, developing an energy-saving drying system that reduces annual CO2 emissions by over 50,000 tons. 3. Future Outlook: Continuous Innovation Leading Green Intelligent Manufacturing 3.1 Strategic Vision and Layout Facing the "dual carbon" goals and the wave of Industry 4.0, Chengdu Mountainpeak Technology has deeply perceived industry transformation trends and made "promoting green transformation" the core strategy of its development. The company not only focuses on optimizing and upgrading existing technologies but also proactively invests in new energy equipment research and energy storage system integration. By establishing the subsidiary Chengdu Gaodingrui Intelligent Equipment Co., Ltd., dedicated to the development of green technologies such as photovoltaic silicon material automated production lines, it demonstrates profound insight and strategic preparation for the future green energy market. 3.2 Social Responsibility and Commitment As an industry leader, Chengdu Mountainpeak Technology is keenly aware of its social responsibilities. The company actively collaborates with well-known enterprises to jointly promote the construction of green supply chain platforms, achieving energy consumption data interoperability and carbon footprint tracking, aiding the industry's low-carbon transition. It also advocates and participates in the formulation of industrial automation low-carbon technology standards, promoting standardized industry development. During the 2008 Wenchuan earthquake, the company donated 100,000 yuan in cash and materials, demonstrating its sense of social responsibility and commitment. 3.3 Continuous Innovation and Ecological Co-construction Chengdu Mountainpeak Technology understands that only continuous innovation can maintain a leading position in a rapidly changing market environment. Therefore, the company continuously increases R&D investment, attracts high-end talents, and jointly promotes the standardization of key technologies. By building an open and inclusive innovation ecosystem, Chengdu Mountainpeak Technology is leading the industrial silicon industry toward a greener and smarter future. In the future, Chengdu Mountainpeak Technology will continue to uphold the development philosophy of "integrity-based, perpetual innovation," leading the industrial silicon industry toward a more brilliant tomorrow.

2025-07-30

Chengdu Mountainpeak Technology Hydraulic System Innovation: A New Benchmark for Efficiency, Energy Saving, and Environmental Protection

In the mining workshops where heavy equipment roars and on the precision manufacturing factory lines, hydraulic systems serve as the core power units of industrial equipment. Their performance directly affects production efficiency and environmental protection levels. However, traditional hydraulic systems have long faced two major technical bottlenecks: hydraulic oil leakage leading to rising operating costs, and high energy consumption caused by valve throttling control. Under the "dual carbon" strategy, Chengdu Mountainpeak Technology - Dingrui Hydraulic has injected green genes into hydraulic systems through breakthroughs in material science and control technology, redefining industry technical benchmarks. 1. Technical Breakthrough: From Sealing Innovation to Intelligent Control As the core hydraulic equipment manufacturing platform under Chengdu Mountainpeak Technology, Sichuan Dingrui Hydraulic Equipment Manufacturing Co., Ltd. relies on twenty years of industrial automation technology accumulation to carry out systematic technical research targeting industry pain points. (1) Material Innovation to Strengthen Leak Prevention Foundation The core issue of hydraulic system leakage lies in the failure of sealing materials under high-pressure conditions. The R&D team innovatively adopted special high-pressure resistant composite sealing materials, whose molecular structure density is over 50% higher than traditional materials. It maintains zero leakage after continuous operation for 500 hours under 35MPa high pressure (verified by official technical documents). Extreme condition tests show that the new sealing material maintains a resilience retention rate of 92% within the temperature range of -30°C to 120°C, with deformation resistance increased threefold, thoroughly solving the industry's chronic problem of "leakage and dripping" from the material level. (2) Intelligent Closed-Loop Achieves On-Demand Energy Supply Traditional hydraulic systems use valve throttling regulation, causing a large amount of energy to be wasted as heat. The "sensor-decision-execution" closed-loop control system constructed by Chengdu Mountainpeak Technology - Dingrui Hydraulic has achieved revolutionary breakthroughs: 1. Deployment of a high-precision pressure/flow sensor network to collect real-time load data of actuators 2. Development of intelligent control algorithms to dynamically calculate optimal energy supply parameters 3. Precise output through variable frequency motors and electronically controlled pump units, eliminating ineffective overflow Industrial field tests show that this technology reduces system ineffective energy consumption by 60%, power unit electrical energy loss by 35%, especially in rolling production lines where hydraulic system temperature drops from 65°C to 42°C, and cooling system energy consumption decreases by 40%. (3) Innovative Achievements Create New Industry Standards The highly efficient hydraulic drive system born from the integration of dual technologies brings disruptive improvements: - Hydraulic fluid recycling rate increased by 40%, sharply reducing annual hydraulic oil replenishment - Equipment maintenance cycle exceeds 5000 hours, doubling the industry average - Comprehensive energy consumption reduced by 30%, with a single heavy equipment saving over 100,000 kWh annually A case study at a large copper mine in Yunnan shows that after transformation, annual hydraulic oil consumption decreased by 32%, waste oil treatment costs dropped by 28%, equipment failure rate reduced by 45%, saving over 2 million yuan in annual operating costs. 2. Value Reconstruction: Green Empowerment Throughout the Lifecycle At a large non-ferrous metal mine in Yunnan, heavy transport vehicles loaded with ore continuously operate on steep slopes. Previously, due to frequent hydraulic system leaks, more than 3 tons of hydraulic oil had to be replenished monthly, and maintenance downtime caused a 15% loss in transport capacity. After introducing Chengdu Mountainpeak Technology - Dingrui Hydraulic's hydraulic system, continuous high-intensity operation for 6 months occurred without leakage failures, maintenance cycles extended to 8 months, saving over 2 million yuan annually in oil and maintenance costs. This is just a glimpse of Mountainpeak Technology's hydraulic innovation empowering thousands of industries. (1) Lifecycle Value Reconstruction Economic benefits: Reduced hydraulic oil consumption and maintenance costs lower comprehensive equipment operating costs by 25%-40% Environmental benefits: Waste oil generation reduced by over 30%, alleviating hazardous waste treatment pressure at the source Energy efficiency breakthrough: System comprehensive efficiency increased to 85%, with a single device reducing carbon emissions by 50 tons annually (2) Strategic Pivot for Green Intelligent Manufacturing As the national "dual carbon" goals drive industrial system transformation, Chengdu Mountainpeak Technology - Dingrui Hydraulic's hydraulic system innovation becomes a breakthrough tool for high energy-consuming industries: - Providing zero-leakage operation solutions for mining machinery, protecting mining area ecological environments - Assisting metallurgical enterprises in achieving unit output energy consumption targets, breaking through green factory certification bottlenecks - Achieving zero oil pollution discharge in building material production lines, creating clean production model workshops 3. Innovation Ecosystem: Building a New Pattern of Green Intelligent Manufacturing The innovation of hydraulic systems is not an isolated breakthrough. At Xinjiang Hesheng Group's industrial silicon production base, Chengdu Mountainpeak Technology - Dingrui Hydraulic's hydraulic system, intelligent batching, and DCS control form a trinity green production matrix; at Tongwei Solar's Jintang base, hydraulic-driven intelligent logistics vehicles shuttle within a 5G IoT network, achieving zero-pollution precise delivery. This confirms Mountainpeak Technology's strategic transformation from a single equipment supplier to a green intelligent manufacturing service provider. Underlying Logic of Sustainable Innovation "Continuous innovation is not just a slogan but a survival rule embedded in the company's genes," said Chengdu Mountainpeak Technology's technical director, revealing the root of ongoing breakthroughs. The company invests 12% of its revenue annually in R&D, with over 30 national patents, more than one-third related to hydraulic innovations. Subsidiary Sichuan Dingrui Hydraulic's specialized manufacturing systems such as deep hole boring and honing equipment ensure core technology autonomy and control. Collaborative Evolution of Green Ecology Chengdu Mountainpeak Technology is integrating hydraulic innovation into a broader low-carbon blueprint: - Jointly developing hydraulic-electronic control integration protocols with Siemens to improve system response accuracy - Exploring hydraulic energy storage technology in energy storage equipment to convert off-peak electricity - Customizing oil-free hydraulic manipulators for photovoltaic silicon wafer production lines to meet semiconductor-grade cleanliness requirements When the giant bucket of the mine steadily lifts hundreds of tons of ore, and photovoltaic silicon ingots are perfectly demolded in a dust-free environment, the hydraulic system restructured by Chengdu Mountainpeak Technology - Dingrui Hydraulic is writing a new chapter in industrial civilization. From microscopic breakthroughs in sealing materials to intelligent evolution of control algorithms, this technology-innovation-driven company is accelerating China's manufacturing toward a future of zero leakage, zero waste, and zero pollution.

2025-07-22

Chengdu Mountainpeak Technology 2025 Mid-Year Report: A New Chapter in Intelligent Manufacturing, Carbon Reduction and Efficiency Improvement

As the giant wheel of industrial civilization sails towards new climate goals, Chengdu Mountainpeak Technology is navigating the 2025 industrial wave with dual engines of "technological innovation + green intelligent manufacturing." In the first half of the year, this company, grounded in "integrity and innovation," delivered solid results with two patented technologies: from the deserts of Africa to the grasslands of Inner Mongolia, from international orders to domestic benchmarks, every step confirms China's firm commitment to transforming manufacturing towards green and intelligent development. 1. Technical Strength: Two Patents Authorized, Strengthening the Foundation of Intelligent Manufacturing Technological innovation is the core engine of Chengdu Mountainpeak Technology's development. On January 24, 2025, the company received national invention patent authorization for two core technologies, establishing key technical barriers: 1) An automatic casting system and method for producing metallurgical silicon (Patent No.: ZL 2024.1 1536766.1): addressing the high energy consumption and low precision issues of traditional metallurgical silicon casting, achieving full-process automated control, providing core support for quality improvement and energy saving in industrial silicon production. 2) A conveyor belt roller device for trough conveyors (Patent No.: ZL 2024.1 1642129.2): overcoming industry bottlenecks of easy wear and high maintenance costs in conveying equipment, significantly extending equipment lifespan. The implementation of these two patents not only breaks technical barriers but also serves as a global pass for "Made in China" to serve the industrial world. At the Tongwei Green Material project site in Inner Mongolia, the engineering team of Chengdu Mountainpeak Technology completed the entire process from plan delivery to production in just 98 days, setting the industry's fastest conversion record. This efficient "laboratory-to-industrialization" connection lays a solid foundation for subsequent technology export—currently, targeting special environments such as high temperatures in the Middle East and dust in Africa, Chengdu Mountainpeak Technology is about to initiate a new wave of industrial upgrades in countries like Oman and Angola. 2. Deepening Global Layout: Technology Export Empowering the "Belt and Road" As the spark of technology crosses mountains and seas, Chengdu Mountainpeak Technology is drawing a unique "China longitude and latitude" on the global industrial map with dual engines of "international breakthrough + localized deep cultivation." One end of this line is the intelligent control system for mining furnaces in the deserts of Angola, and the other is the green production line for solid waste recycling on the grasslands of Inner Mongolia—together weaving the future vision of industrial upgrading. (1) International Market Breakthroughs At the Lubango mining base in Angola, Chengdu Mountainpeak Technology's skirt belt conveyor, through anti-spillage design and patented roller technology, has built an efficient logistics channel, increasing iron ore transportation efficiency by 40% and reducing failure rates by 65%, promoting "Made in China" into the high-end African market. Meanwhile, the silicon iron furnace project in the Duqum Economic Zone of Oman uses an IoT intelligent control system to optimize parameters in real-time, helping local enterprises reduce energy consumption by 18%. These cases mark Chengdu Mountainpeak Technology's leap from a technology follower to an industry standard setter. (2) Major Domestic Projects On the domestic front, Chengdu Mountainpeak Technology's technological breakthroughs are equally remarkable. The Inner Mongolia Huineng project uses "solid waste recycling + intelligent control" technology to process 200,000 tons of coal gangue and fly ash annually, converting them into building materials, equivalent to reducing 300,000 tons of CO₂ emissions; the Baotou Shengquan project, with a silicon iron furnace batching system accuracy of ±0.2%, has increased resource utilization to 98%, promoting traditional enterprises' transition from high energy consumption to low-carbon efficiency. Both projects are set to commence full-scale operations soon, adding to Chengdu Mountainpeak Technology's cases of "technology empowering industry." These two projects act as parallel engines, carrying the global ambition of technology export and the mission of local industrial upgrading. As Angola's intelligent conveyor belts and Inner Mongolia's solid waste recycling lines operate simultaneously, Chengdu Mountainpeak Technology proves through practice that technological innovation can cross borders to serve the world and deeply cultivate local transformation. This "dual-track drive" model not only builds a resilient business matrix for the company but also leaves a vivid mark on China's industrial upgrading landscape, providing a live example for "Made in China" going global. 3. Honors and Qualifications: Dual Recognition from Government and Enterprises, Strengthening Development Momentum As technological breakthroughs transform into industrial upgrading momentum, Chengdu Mountainpeak Technology is receiving dual praise from government and industry. These honors are not just medals but drums driving the company to higher dimensions. 1) On February 26, 2025, it received two honors from Chenghua District, Chengdu: "2024 Outstanding Enterprise in Industrial High-Quality Development" and "Outstanding Tax Contribution Enterprise." This local government recognition marks the strategic value of Chengdu Mountainpeak Technology in Chenghua District and the broader Chengdu industrial landscape. 2) On December 6, 2024, it obtained the High-Tech Enterprise Certification (No.: GR202451002628), reflecting the company's leading R&D investment ratio and authoritative recognition of its efficient "laboratory-to-industrialization" conversion model. This certification injects strong fuel into the company's innovation engine, making every technological breakthrough more confident and infusing policy momentum into technology attacks. Government commendations and qualification upgrades not only affirm Chengdu Mountainpeak Technology's past achievements but also endorse its "technology-driven development" strategy. 4. Ecological Collaboration: Expanding Intelligent Manufacturing Network, Participating in Regional Synergy Chengdu Mountainpeak Technology actively participates in an open intelligent manufacturing ecosystem, expanding technological influence through "regional linkage + leading enterprise cooperation": 1) Regional Industrial Linkage: Invited to actively participate in the "2025 Luojiang District - Chenghua District Intelligent Manufacturing Supply and Demand Docking and 'Intelligent Transformation and Digital Upgrade' Case Presentation" co-hosted by Chenghua and Luojiang Districts, Chengdu Mountainpeak Technology collaborates with Deyang Luojiang Economic Development Zone and Chenghua District Economic and Science Bureau to build an intelligent manufacturing ecosystem. This cooperation facilitated technology sharing among 12 enterprises, forming an industrial chain synergy model of "R&D in Chenghua, transformation in Luojiang," integrating Chengdu's technological advantages with Deyang's industrial base, injecting intelligent manufacturing momentum into the Chengdu-Deyang-Meishan-Ziyang urban cluster. 2) Leading Enterprise Cooperation: At the December 10, 2024, Tongwei Green Material Inner Mongolia project commissioning ceremony, Chengdu Mountainpeak Technology's strategic cooperation with Tongwei Group entered a new phase. Mountainpeak Technology not only provided a full set of intelligent casting systems but also deeply integrated the DCS control module with Tongwei's 5G industrial internet platform. Data shows that after cooperation, energy consumption in battery cell production at Tongwei's Inner Mongolia base dropped by 22%, and yield rate increased to 99.3%, making Chengdu Mountainpeak Technology the core "technology partner" in Tongwei's global supply chain. 5. Carbon Reduction and Efficiency Enhancement: Technology Empowering Green Manufacturing Chengdu Mountainpeak Technology integrates "intelligent manufacturing" and "carbon reduction" as dual main lines throughout its technological practice, building a trinity green manufacturing system: - Solid waste resource utilization: The Inner Mongolia Huineng project turns coal gangue and fly ash into valuable resources, reducing mining and landfill pollution; - Energy efficiency optimization: The silicon iron furnace batching system reduces energy consumption per unit capacity by over 15%, and the metallurgical silicon casting patent reduces heat loss by 20%; - Intelligent substitution: Patents such as the conveyor belt roller device reduce equipment failure rates by 40%, lowering maintenance carbon emissions. In the first half of the year, Chengdu Mountainpeak Technology, centered on the "dual-track drive" strategy, made key progress in technological breakthroughs and ecological collaboration: international markets promoted "Made in China" globalization through Angola's intelligent conveyor belt and Oman's silicon iron furnace projects; domestically, Inner Mongolia's solid waste recycling line and Baotou Shengquan's high-precision system supported low-carbon industrial transformation. The two invention patents broke technical barriers, dual honors and the strategic alliance with Tongwei strengthened development momentum, and the Chengdu-Deyang-Meishan-Ziyang regional ecosystem deepened industrial chain collaboration. In the second half of the year, the company will continue to focus on promoting the landing of Middle East/Africa cooperation projects; supported by the green manufacturing system, it aims to achieve both carbon reduction and efficiency enhancement in solid waste resource utilization and energy efficiency optimization. Chengdu Mountainpeak Technology is advancing towards a broader global stage in the intelligent manufacturing upgrade race with strong technical capabilities and ecological connectivity.

2025-07-07

All-weather response, full-process service—The speed and responsibility of Chengdu Mountainpeak Technology service team

In the field of industrial automation, service efficiency and quality directly affect the competitiveness of enterprises. Chengdu Mountainpeak Technology adheres to the core concept of "24/7 online, full-process service," building a service system that covers the entire project lifecycle. From lightning-fast response to fault demands, to precise measures during the acceptance phase, and lifelong operation and maintenance support, Chengdu Mountainpeak Technology bases itself on technology and links through service, continuously creating value for customers and becoming an industry service benchmark. 1. Lightning Speed: 7×24 Online, Responding Without Delay Chengdu Mountainpeak Technology deeply understands the industry essence that "time is productivity," and with the core concept of "24/7 online, full-process service," has carefully built an efficient and rapid customer service system. Whether it is an emergency fault late at night or technical consultation during holidays, the Mountainpeak team always remains on duty to ensure timely response to customer needs, truly embodying "customer first, service foremost." (1) Rapid Response, Every Second Counts: Chengdu Mountainpeak Technology has established strict and specific response standards, using quantitative indicators to ensure service efficiency: once a customer repair service notification is received, a professional reply is guaranteed within 2 hours. This standard not only reflects the company's emphasis on customer needs but also institutionalizes timely response. For issues requiring on-site resolution, Mountainpeak guarantees arrival times: within 24 hours for provinces and easily accessible areas outside the province; no more than 72 hours even in remote areas. This "lightning" response speed not only solves urgent customer problems but also demonstrates Mountainpeak's extreme pursuit of service efficiency. (2) Remote Support, Seamless Connection: In addition to efficient on-site service, Mountainpeak fully utilizes modern information technology to provide remote online maintenance and debugging services. Through video calls, remote control, and other technologies, engineers can guide customers in real time to solve problems, achieving seamless service connection. This model not only breaks geographical limitations but also greatly shortens fault resolution time. Statistics show that remote support reduces average fault resolution time by over 60% compared to traditional methods, effectively improving customer production efficiency. Additionally, Mountainpeak has established a remote service knowledge base, compiling common problems and solutions into standardized documents for customer self-service queries. This initiative not only improves service efficiency but also enhances customers' ability to solve problems independently, forming a dual-driven model of "remote guidance + self-service." 2. Meticulous Service: Full-Process Protection, From Acceptance to Lifelong Companionship Mountainpeak's service goes beyond fault resolution, spanning the entire project lifecycle, from project acceptance to long-term operation and maintenance, providing professional support throughout. (1) Acceptance Phase, Precise Measures: Taking the Sichuan Fuxing New Materials Co., Ltd. project as an example, during the acceptance phase, Mountainpeak conducts in-depth analysis of the project's unique needs and environmental factors, tailoring exclusive solutions. From equipment configuration to strict control of acceptance indicators, every step is precisely aligned to ensure smooth project acceptance and lay a solid foundation for stable subsequent operation. (2) Lifelong Service, Commitment Fulfilled: Mountainpeak practices a lifelong service commitment, providing free on-site service during the warranty period and charging only basic fees at preferential rates after the warranty expires. This long-term service guarantee effectively alleviates customer concerns and helps projects continuously deliver value. (3) Unified Standards, Customer Satisfaction: Every on-site service strictly follows unified standards. After service completion, customers are invited to rate the service, with customer satisfaction as the sole measure of service quality. This customer-centric service philosophy drives Mountainpeak to continuously optimize service processes and improve service quality. 3. Proactive Responsibility: Listening Attentively, Driving Evolution Mountainpeak understands that quality service is not just passive response but proactive listening and continuous improvement. (1) Regular Follow-ups, Deepening Relationships: The company regularly follows up with customers to deeply understand product usage and customer feedback. These valuable insights become important bases for product improvement and service upgrades, further strengthening trust and cooperation. (2) Technical Iteration, Innovation Driven: Based on customer feedback and market trends, Mountainpeak continuously invests in R&D to promote technological iteration and product innovation. From microcomputer batching control systems to DCS control systems, innovative products are continuously launched, improving production efficiency, reducing energy consumption, and aligning with national energy-saving and emission reduction policies. 4. Integration Power: Technology as Foundation, Service as Chain Against the backdrop of deep integration between manufacturing and service industries, Mountainpeak uses technological innovation as the cornerstone and quality service as the chain to build a unique competitive advantage. (1) Technology Leadership, Innovation Driven: With 25 years of solid experience, over 30 national patents, and service to more than a hundred enterprises, Mountainpeak's strong R&D capabilities and professional technical team provide continuous technical support and innovation momentum. (2) Service Integration, Reshaping Value: Mountainpeak integrates service into the entire product lifecycle, from pre-sales consultation and technical support to after-sales maintenance, striving for excellence at every stage. Through the service transformation of software control systems and feeding and batching equipment, Mountainpeak continuously strengthens R&D design services and manufacturing execution, promoting enterprise transformation toward composite service manufacturing. (3) Strategic Vision, Creating the Future Together: Facing a new round of technological revolution and industrial transformation, Mountainpeak maintains an open and inclusive attitude, actively seeking cooperation opportunities with other enterprises, universities, and research institutions to jointly advance technology R&D and market expansion. This strategic vision not only keeps Mountainpeak leading in fierce market competition but also injects new vitality into the technological progress and market development of the entire automation industry. From start to finish, Mountainpeak Technology, with lightning-fast response speed, meticulous full-process service, proactive listening and improvement, and the integration of technology foundation and service chain, is gradually becoming a leading enterprise in industrial automation. In the future, Mountainpeak will continue to uphold the development philosophy of "integrity-based, perpetual innovation," providing customers with higher-quality exclusive automation solutions and jointly promoting the vigorous development of the industrial automation industry.

2025-06-27

Intelligent control drives industrial transformation, Mountainpeak Technology's path of responsibility

Under the dual impetus of the "dual carbon" goals and the wave of Industry 4.0, the green and intelligent transformation of the industrial sector has become an inevitable trend of the times. As a national high-tech enterprise, Chengdu Mountainpeak Technology Co., Ltd., with its profound technical foundation and forward-looking strategic vision, stands at the forefront of promoting industrial green transformation. 1. Technological Innovation: Intelligent Control Solves High Carbon Challenges Facing the severe challenges of high energy consumption and high emissions in traditional industries, Chengdu Mountainpeak Technology has deeply cultivated the field of intelligent control, successfully developing core technologies such as intelligent control systems for submerged arc furnaces, high and low voltage intelligent voltage regulation systems, and efficient hydraulic drive systems, precisely addressing industry pain points. 1) Intelligent Control System for Submerged Arc Furnaces: This system uses AI algorithms to optimize ingredient ratios, combined with real-time data monitoring and dynamic adjustment technology, achieving precise and intelligent control of the production process. Taking the Xinjiang Hoshine Silicon Industry annual 800,000-ton industrial silicon production line as an example, the application of this system not only significantly improved production efficiency but also promoted the upgrade of the "dark factory," saving over 30,000 tons of standard coal annually, setting a benchmark for green production in the industry. 2) High and Low Voltage Intelligent Voltage Regulation System: Addressing voltage fluctuations and power factor issues in industrial electricity use, Chengdu Mountainpeak Technology developed a high and low voltage intelligent voltage regulation system that integrates dynamic reactive power compensation technology and frequency conversion control modules, significantly improving equipment power factor and reducing line losses, bringing remarkable energy-saving effects to high-energy-consuming equipment in industries such as building materials and chemicals. 3) Efficient Hydraulic Drive System: To tackle issues such as oil leakage and high energy consumption in traditional hydraulic systems, Chengdu Mountainpeak Technology adopted high-pressure resistant sealing materials and closed-loop control technology to develop an efficient hydraulic drive system, enhancing oil circulation utilization, extending equipment maintenance cycles, and reducing waste disposal costs, providing strong support for the green transformation of industries like mining machinery. 2. Ecological Construction: Building a Green Manufacturing Collaborative Network Chengdu Mountainpeak Technology is committed not only to breakthroughs in individual technologies but also to constructing full-chain, cross-industry green intelligent solutions. Through an industrial IoT platform, Chengdu Mountainpeak Technology achieves seamless integration of equipment, data, and management, promoting resource integration and collaborative innovation across industries. 1) Photovoltaic Field: Chengdu Mountainpeak Technology provides DCS control modules and intelligent logistics systems for Tongwei Solar's Jintang base, realizing full-process energy consumption monitoring of battery cell production, reducing energy consumption per unit capacity, and helping the base become the world's first "5G + Industrial Internet" super factory. 2) Metallurgical Field: In cooperation with Xinjiang Hoshine Group, the world's largest industrial silicon producer, Chengdu Mountainpeak Technology's automatic casting system reduces casting error rates from ±5% to ±0.5% through precise measurement and unmanned operation, greatly improving production efficiency and gradually increasing product yield. 3) Building Materials Field: Chengdu Mountainpeak Technology transfers the waste heat recovery technology accumulated in the metallurgical field to the building materials industry, developing energy-saving drying systems to achieve technology reuse and scenario innovation. The Yunnan Yongchang Silicon Industry project is a typical case of Chengdu Mountainpeak Technology building a green manufacturing collaborative network. Through the collaborative application of fully automatic batching systems, intelligent control systems, and industrial IoT platforms, it promotes the intelligent and low-carbon transformation of high-energy-consuming processes, supporting Yunnan's "hydropower silicon material - photovoltaic module" trillion-level green industrial chain. 3. Responsibility: Balancing Strategic Foresight and Social Responsibility Technological innovation and ecological construction rely on core strategic support. Chengdu Mountainpeak Technology has deeply insight into the industry transformation trends under the "dual carbon" strategy, making "promoting green transformation" the core strategy of corporate development. The company not only focuses on optimizing and upgrading existing technologies but also proactively invests in new energy equipment research and development and energy storage system integration, demonstrating its strategic foresight. 1) Strategic Foresight: Chengdu Mountainpeak Technology established a subsidiary, Chengdu Gaodingrui Intelligent Equipment Co., Ltd., focusing on the research and development of green technologies such as photovoltaic silicon material automation production lines, showing profound insight and strategic preparation for the future green energy market. 2) Social Responsibility: Chengdu Mountainpeak Technology actively cooperates with well-known domestic and international enterprises to jointly promote the construction of green supply chain platforms, achieving energy consumption data interoperability and carbon footprint tracking, assisting the industry in low-carbon transformation. It also advocates and participates in the formulation of industrial automation low-carbon technology standards, promoting standardized industry development, reflecting its responsibility and commitment as an industry leader. Looking ahead, with the deep implementation of the "dual carbon" strategy and the continuous advancement of Industry 4.0, Chengdu Mountainpeak Technology will continue to uphold the development philosophy of "innovation, green, responsibility," leading the industry toward a greener and smarter future. The story of Chengdu Mountainpeak Technology is a legend of technological innovation and a model of responsibility and commitment, inspiring more enterprises to join the ranks of green transformation and jointly contribute to the sustainable development of the planet.

2025-06-23

With 18 years of experience, Mountainpeak Technology solves critical industrial automation challenges with "hardcore patents".

Innovation Engine: Driving Efficiency Leap in Mining and Metallurgical Production Lines In the production lines of the mining and metallurgical industries, the wear of trough conveyor idler rollers has long been a painful issue—frequent conveyor belt tears, unexpected equipment shutdowns... Annual maintenance costs of millions erode company profits. In early 2025, Chengdu Mountainpeak Technology launched a core patent "Trough Conveyor Idler Device" (Patent No.: CN119117545B) that successfully broke the deadlock: it uses special wear-resistant alloy materials and a wave-shaped structural design, reducing friction and enabling silent operation. The application results are remarkable—conveyor belt wear rate decreased by 40%, equipment lifespan extended by over 50%, and maintenance costs reduced by 60%. This device is just one of the 34 patents held by Chengdu Mountainpeak Technology. After 18 years of technological breakthroughs, its patent portfolio covers key areas such as waste heat recovery from metallurgical furnaces, intelligent casting of metallurgical silicon, and DCS control systems, building a dual technological barrier of "hardware + software," successfully filling more than ten domestic technological gaps and continuously leading industry technology implementation. Benchmark Practice: Automation Revolution from Yanjin to Xinjiang Yanjin Xinan Chemical's "Unmanned Raw Material Factory": Addressing the core issue of silica impurities, in 2024, Chengdu Mountainpeak Technology customized a full-process automation solution for Yanjin Xinan Chemical. The system uses a self-developed patented drum stone washer to powerfully remove mineral impurities, combined with a high-precision weighing scale to achieve zero error in material proportioning, resulting in a 60% reduction in labor costs and elevating raw material purity to the industry's top level. Thanks to this outstanding performance, the solution has become a benchmark in the silicon-based materials production field. Xinjiang Qiya's "Coal-Power-Silicon Integration" Lifeline Project: In the Gobi desert of the Zhundong coalfield, Mountainpeak Technology deployed a fully automated batching system for Xinjiang Qiya's "Coal-Power-Silicon Integration" project, successfully replacing traditional manual operations and reducing raw material proportioning error from ±5% to ±0.3%. This precision breakthrough laid a crucial foundation for the stable and efficient annual production of 800,000 tons of industrial silicon. Currently, the workshop completed full-line installation and entered power-on commissioning by the end of 2024. After commissioning, it is expected to increase circular economy benefits by over ten million yuan annually. Technology for All: Independently Controllable Sparks Facing the challenge of high transformation costs hindering the intelligent upgrading of small and medium-sized enterprises, Chengdu Mountainpeak Technology introduced a modular DCS system to lower the threshold. The effectiveness of this solution was fully verified in the 100,000-ton hydropower silicon project of Yunnan Yongchang Silicon Industry: transformation costs were reduced to one-third of traditional solutions, helping achieve energy-saving goals. Meanwhile, to overcome the bottleneck of core technology dependency and ensure industrial security, Chengdu Mountainpeak Technology independently developed a domestically produced industrial control core communication protocol. Currently, this protocol has been deployed in over 30 medium-sized enterprises in metallurgy, building materials, and other industries, becoming a reliable "security lock" against international supply chain risks. Relying on 18 years of technological breakthroughs and 34 patents, Mountainpeak Technology has achieved a leap from innovating a single idler roller to reconstructing an industrial control system ecosystem, breaking through multiple "bottleneck" areas, proving with concrete actions that the lifeline of core technology must be firmly held in one's own hands.